Satoshi Kamiya - Phoenix
Forum rules
READ: The Origami Forum Rules & Regulations
READ: The Origami Forum Rules & Regulations
-
- Newbie
- Posts: 2
- Joined: January 13th, 2005, 7:09 am
Satoshi Kamiya - Phoenix
Hi everybody. This is my first post. Is it possible for someone to help me finish the phoenix model. I managed to fold the base but i can't figure out where to go to now. Is there anyone out there who can help me if I post a pic of the base that I have now?
Thanks in advance.
P.S. Is there anywhere I can purchase old copies of the Tanteidan convention books (1-6)?
Thanks in advance.
P.S. Is there anywhere I can purchase old copies of the Tanteidan convention books (1-6)?
- OrigamiMagiro
- Forum Sensei
- Posts: 655
- Joined: February 27th, 2004, 3:02 am
- Location: Bos, MA
- Contact:
Not quite sure about which phoenix you are speaking of. Do you mean Satoshi's? If so, which version?
About old Tanteidan Convention books, these are out of print so it will be hard to purchase these from any store. You can try checking Ebay, but they are very difficult to find; I myself am still in search for a way to acquire them.
Sorry!
About old Tanteidan Convention books, these are out of print so it will be hard to purchase these from any store. You can try checking Ebay, but they are very difficult to find; I myself am still in search for a way to acquire them.
Sorry!
-
- Newbie
- Posts: 2
- Joined: January 13th, 2005, 7:09 am
- OrigamiMagiro
- Forum Sensei
- Posts: 655
- Joined: February 27th, 2004, 3:02 am
- Location: Bos, MA
- Contact:
I think I could help you a little, but I'm not sure what your problem is. If you are indeed referring to Phoenix version 3.5, then the only place I have seen this creasepattern is the most recent Tanteidan Magazine. Shaping is hard and there are a few tricks to look at. The head and wings seem pretty straight forward from what I see, but the tail texture poses an interesting problem. It involves a series of crimps along the long point and then folding in half.
- OrigamiMagiro
- Forum Sensei
- Posts: 655
- Joined: February 27th, 2004, 3:02 am
- Location: Bos, MA
- Contact:
Here is some help regarding the tail of Satoshi's Phoenix models.
First, you fold the tail as shown in the creasepattern (There are different ways to get to something that looks like step 3) depending on the version of the phoenix):
1)
2)
3)
Now you reverse fold the following pattern (Crimp in and out multiple times)
4)
5)
You then proceed to open up the top of the model and valley the two sides in half to achieve the finished result:
Top)
Bottom)
Hope that helps!
First, you fold the tail as shown in the creasepattern (There are different ways to get to something that looks like step 3) depending on the version of the phoenix):
1)
2)
3)
Now you reverse fold the following pattern (Crimp in and out multiple times)
4)
5)
You then proceed to open up the top of the model and valley the two sides in half to achieve the finished result:
Top)
Bottom)
Hope that helps!
Last edited by OrigamiMagiro on July 11th, 2011, 3:26 pm, edited 5 times in total.
-
- Senior Member
- Posts: 425
- Joined: April 27th, 2003, 1:28 am
- Location: Rock n robot!
- OrigamiMagiro
- Forum Sensei
- Posts: 655
- Joined: February 27th, 2004, 3:02 am
- Location: Bos, MA
- Contact:
-
- Senior Member
- Posts: 425
- Joined: April 27th, 2003, 1:28 am
- Location: Rock n robot!
(null)
a little help
http://blog.naver.com/wnsdhsla1234/130000207843
My blog's post
and Phoenix 3.5 is very easy
http://blog.naver.com/wnsdhsla1234/130000207843
My blog's post
and Phoenix 3.5 is very easy
-
- Senior Member
- Posts: 425
- Joined: April 27th, 2003, 1:28 am
- Location: Rock n robot!
-
- Super Member
- Posts: 171
- Joined: January 18th, 2006, 8:20 am
- Contact: