Satoshi Kamiya - Phoenix
Forum rules
READ: The Origami Forum Rules & Regulations
READ: The Origami Forum Rules & Regulations
-
- Junior Member
- Posts: 77
- Joined: November 18th, 2005, 9:42 pm
- eric_son
- Senior Member
- Posts: 256
- Joined: July 10th, 2006, 11:44 am
- Location: Quezon City, Philippines
- Contact:
Phoenix 3.0 --> Help help with the wings and chest.
Like caysao1 posted earlier, I also need help in doing those wings.
I've made dozens of attempts, but I still end up getting wings that look more like the side fins of a fish.
Looking at the picture from Kamiya's website (as well as the one posted by caysao1 earlier), there seems to be a huge flat area backing the wings. Where did that come from? I tried flattening (un-pleating?) out the pleats starting from the bird's armpits...but they don't seem to look like the one in the picture.
....
Then there's this thing with the bird's chest.
Based on the CP above, what happens to the marked portion?
If I try to collapse it as it appears in the image above, I get a lot of extra paper that belongs to the portion highlighted in the previous image. Is there really extra paper or did I collapse the chest incorrectly?
Thanks
Like caysao1 posted earlier, I also need help in doing those wings.
I've made dozens of attempts, but I still end up getting wings that look more like the side fins of a fish.
Looking at the picture from Kamiya's website (as well as the one posted by caysao1 earlier), there seems to be a huge flat area backing the wings. Where did that come from? I tried flattening (un-pleating?) out the pleats starting from the bird's armpits...but they don't seem to look like the one in the picture.
....
Then there's this thing with the bird's chest.
Based on the CP above, what happens to the marked portion?
If I try to collapse it as it appears in the image above, I get a lot of extra paper that belongs to the portion highlighted in the previous image. Is there really extra paper or did I collapse the chest incorrectly?
Thanks
- mithrandir
- Newbie
- Posts: 19
- Joined: September 5th, 2006, 6:12 pm
- Location: Brazil
- Contact:
First try
Hi, this is my first try folding kamiya's phoenix.
The paper I used was too thick and torn at some places. I doesn't get even close to kamiya's... I had the same problems as eric_son.
I have 2 questions:
- Did I fold the wings right???
-What do I do with the extra flap that appears under the model???
The paper I used was too thick and torn at some places. I doesn't get even close to kamiya's... I had the same problems as eric_son.
I have 2 questions:
- Did I fold the wings right???
-What do I do with the extra flap that appears under the model???
- artur biernacki
- Forum Sensei
- Posts: 521
- Joined: September 14th, 2004, 5:44 pm
- Location: Poland
- Contact:
- eric_son
- Senior Member
- Posts: 256
- Joined: July 10th, 2006, 11:44 am
- Location: Quezon City, Philippines
- Contact:
Hi Artur,
Thanks for posting those images.
Those are the biggest and clearest Phoenix 3.0 i've seen, and it really clarifies a lot of things.
But alas, I'm still at work and I can't wait to go home and take another attempt.
Anyway, if you don't mind, I still have some questions about the flat-bottom part of the wing:
Did that part come from this portion of the CP?
Thank you very much and best regards,
Eric
Thanks for posting those images.
Those are the biggest and clearest Phoenix 3.0 i've seen, and it really clarifies a lot of things.
But alas, I'm still at work and I can't wait to go home and take another attempt.
Anyway, if you don't mind, I still have some questions about the flat-bottom part of the wing:
Did that part come from this portion of the CP?
Thank you very much and best regards,
Eric
- artur biernacki
- Forum Sensei
- Posts: 521
- Joined: September 14th, 2004, 5:44 pm
- Location: Poland
- Contact:
- mithrandir
- Newbie
- Posts: 19
- Joined: September 5th, 2006, 6:12 pm
- Location: Brazil
- Contact:
-
- Newbie
- Posts: 40
- Joined: June 19th, 2006, 7:23 am
- Contact:
HI!
can someone tell me how to crease this part or at least the point refence:
[img]http://aycu12.webshots.com/image/12891/2001846791457518416_rs.jpg[/img]
THANKS.
can someone tell me how to crease this part or at least the point refence:
[img]http://aycu12.webshots.com/image/12891/2001846791457518416_rs.jpg[/img]
THANKS.