Brian Chan - Nekobus (CP)
Forum rules
READ: The Origami Forum Rules & Regulations
READ: The Origami Forum Rules & Regulations
- Daydreamer
- Moderator
- Posts: 1423
- Joined: October 28th, 2005, 2:53 pm
- Location: Vienna, Austria
- Contact:
Since the model is NOT box-pleated, you won't get far no matter what grid size you choose. A rough estimate would be that the pleats on the outside are about 1/47.5 of the side length. (seeing that each of the five repeated structures is about 9.5 pleats in length)
The best you could do for starts is to fold fifths horizontally, since the structures on the left and right side are repeated five times. After that, here's what I would do:
Measure the location of the red dot which is probably the most important reference point for this model and input the data into reference finder.
From this point I would have all the data necessary for folding the left and right side of the model. As for the rest of the model, have fun
The best you could do for starts is to fold fifths horizontally, since the structures on the left and right side are repeated five times. After that, here's what I would do:
Measure the location of the red dot which is probably the most important reference point for this model and input the data into reference finder.
From this point I would have all the data necessary for folding the left and right side of the model. As for the rest of the model, have fun
So long and keep folding ^_^
Gerwin
Gerwin
-
- Super Member
- Posts: 207
- Joined: February 22nd, 2008, 5:36 pm
- Location: A para-dimensional warp in space-time. Otherwise known as the Homsar Reservation.
-
- Junior Member
- Posts: 64
- Joined: July 17th, 2009, 12:02 am
-
- Junior Member
- Posts: 64
- Joined: July 17th, 2009, 12:02 am
-
- Junior Member
- Posts: 64
- Joined: July 17th, 2009, 12:02 am
-
- Junior Member
- Posts: 64
- Joined: July 17th, 2009, 12:02 am