Diagrams for my Wild Boar

Ondrej.Cibulka · Post by **Ondrej.Cibulka** » April 7th, 2008, 3:21 pm

I am sorry for sermonize. Steps 27 and 28 are absolutely different. About step 27 I am not sure, I need to fold the model again, but step 28 is really easy, just pull a little bit that leg and open paper in the middle (as shown on the picture) and it will complete alone - that small white tip must be underneath of the leg. That small white tip is redundant. Hope, it helps. If you have problems with step 27, tell me and be patient. I will fold it again...

chesslo · Post by **chesslo** » April 7th, 2008, 8:45 pm

thank you, i will wait

tmikuckis · Post by **tmikuckis** » April 8th, 2008, 10:05 pm

very nice diagram, the pictures make everything very clear.

zxop9 · Post by **zxop9** » April 11th, 2008, 3:22 am

a link to the boar i made

http://s281.photobucket.com/albums/kk23 ... ickthrough

i folded it with graph paper and photgraphed it ona scanner ;p

Ondrej.Cibulka · Post by **Ondrej.Cibulka** » April 11th, 2008, 12:56 pm

Very special way to photograph plastic model...

paper-okami · Post by **paper-okami** » June 13th, 2008, 5:30 am

YESSS!!!!

i saw this on someones flikr account, and have been looking for it for like an hour...

thanks SO much for posting this zeobar, you did a great job!

howardh · Post by **howardh** » June 14th, 2008, 2:33 am

I'm stuck on step 21. How am I supposed to fold the part the I unwrapped on the left?

Drgn · Post by **Drgn** » June 15th, 2008, 7:55 am

Thanks for these diagrams

You did an excellent job in making this boar! I'll be sure to give it a shot

paper-okami · Post by **paper-okami** » July 20th, 2008, 8:35 am

ok everyone.... imma bout ready to CRY, BECAUSE IM STUCK ON STEP 6, and i cant figure out how to get the color change when you take out the hidden flap...i get the exact shape youre supposed to get, but it doesnt change color....the colored side of the paper is inside, and i dont understand how to bring it out...

can anyone help me? Thank you so much!

Aznman · Post by **Aznman** » July 23rd, 2008, 2:10 am

The best I can explain it without pictures is this:

Start with the model as in step 5. Fold the petal fold flaps together so that they stick out from the rest of the model at 90 degrees.

Along the back edge of the petal fold you will see the raw edge of the paper. That is the edge of paper that you want to unwrap.

In order to unwrap the paper, you have to partially or completely unfold the model and refold it.

Hopefully that helps.