Diagrams for my Wild Boar
Forum rules
READ: The Origami Forum Rules & Regulations
READ: The Origami Forum Rules & Regulations
- Joe the white
- Senior Member
- Posts: 456
- Joined: May 17th, 2003, 2:51 pm
Just folded it. Steps 29-30 were a little confusing not knowing what flaps were involved, but otherwise the steps were pretty clear. I love how the model is nice from above as well as the sides. It has potential of a 3-d underbelly, but I feared to manipulate the japanese foil further. A beautiful model, especially being from a blintz-type base. Congrats .
Came up with a new model, by running a river of pleats down the middle of both sides of the paper, for fingers and toes. Then I folded the same base as for the boar. How to collapse the pleats is pretty difficult (both to do, and for me to describe), but it ends up creating the bottom jaw and tongue. It also creates two more additional lateral flaps, which i did not need in the model.
I was inspired by Guspath Go's werewolf, and wanted to create one of my own. I saw that the Boar base would work, if modified, and chose to work of it. The result turned out to be a bit cartoonish, but I was able to accomplish all the details I had hoped.
Werewolf
This uses the same base as the Boar, so I thought I'd post it in here too, in case anyone wants to try it.
I was inspired by Guspath Go's werewolf, and wanted to create one of my own. I saw that the Boar base would work, if modified, and chose to work of it. The result turned out to be a bit cartoonish, but I was able to accomplish all the details I had hoped.
Werewolf
This uses the same base as the Boar, so I thought I'd post it in here too, in case anyone wants to try it.
- Ondrej.Cibulka
- Buddha
- Posts: 1055
- Joined: January 9th, 2006, 4:18 pm
- Location: Czech republic
- Contact:
Aaaa I got frightened! Terrible monster!
Send me please your email as a personal message.
Send me please your email as a personal message.
Ondrej Cibulka Origami, www.origamido.cz
- Ondrej.Cibulka
- Buddha
- Posts: 1055
- Joined: January 9th, 2006, 4:18 pm
- Location: Czech republic
- Contact:
-
- Newbie
- Posts: 4
- Joined: April 14th, 2007, 1:59 am
i don't understand...
your model is very good/// but
i don't understand from 26 to 27...
how i do that?
please more picture about that..
my e-mail address is
azuremilk17@naver.com
please give me a photos ASAP
thank you//...
i don't understand from 26 to 27...
how i do that?
please more picture about that..
my e-mail address is
azuremilk17@naver.com
please give me a photos ASAP
thank you//...